Bill
Bill > A4988
summary
Introduced
06/12/2017
06/12/2017
In Committee
06/12/2017
06/12/2017
Crossed Over
Passed
Dead
01/08/2018
01/08/2018
Introduced Session
2016-2017 Regular Session
Bill Summary
This bill would codify certain safety requirements related to inflatable rides, regulated by the Department of Community Affairs pursuant to the "Carnival-Amusement Rides Safety Act" and regulations at N.J.A.C.5:14A-13.1 et seq. Under the bill, an inflatable ride manufacturer is to create a manual on operation, maintenance, and set-up of the inflatable ride, which would include illustrations and detailed instructions in addition to specific tie-down and anchorage requirements. A manufacturer would be required to indicate safe operation and usage requirements for each inflatable ride, including avoidance of imminent danger, rider conduct, and cleanliness. The bill requires every inflatable ride to have an identification and data plate attached, glued, or sewn to it. The identification and data plate are to include: the manufacturer's name and address; date of manufacture; ride name and serial number; rider capacity, by weight and number; cubic feet per minute required to properly inflate the ride and type of blower to be used; and any other requirements as determined by the Commissioner of Community Affairs. The bill requires an operator to perform a thorough check of the inflatable ride and its accessories to ensure that all anchor points, anchor ropes, and anchor stakes or ballasts are undamaged and suitable before use. The bill additionally requires that: · Each inflatable ride include one set of ground anchors. · The size and number of anchorage points are to be adequate for the structure, and take into account live and wind loads. · All tie-down ropes attached to the inflatable ride are to be fastened to a stake or anchorage. · Anchors are to be protected to prevent any public hazard. · Stakes or ballast are to be used at every anchorage point and be installed according to manufacturer requirements. In the event of any approaching hazardous weather related condition, the bill requires that an operator evacuate riders and deflate the inflatable ride. After the weather condition passes, the operator is to dry, re-inflate, and re-inspect the inflatable ride and only re-open it when deemed safe. The bill prohibits an inflatable ride from being used if the wind velocity exceeds the manufacturer's maximum safe operating wind speed.
AI Summary
This bill codifies certain safety requirements for inflatable rides regulated by the Department of Community Affairs. It requires inflatable ride manufacturers to provide a manual with detailed instructions on operation, maintenance, and set-up, including tie-down and anchorage requirements. The bill mandates that each inflatable ride have an identification and data plate with specific information, and that operators perform thorough checks and use proper anchoring methods. In the event of hazardous weather, the operator must evacuate riders and deflate the ride. The bill also prohibits operation if the wind speed exceeds the manufacturer's recommended maximum safe operating speed.
Committee Categories
Business and Industry
Sponsors (3)
Last Action
Introduced, Referred to Assembly Consumer Affairs Committee (on 06/12/2017)
Official Document
bill text
bill summary
Loading...
bill summary
Loading...
bill summary
| Document Type | Source Location |
|---|---|
| State Bill Page | https://www.njleg.state.nj.us/bills/BillView.asp?BillNumber=A4988 |
| BillText | https://www.njleg.state.nj.us/2016/Bills/A5000/4988_I1.HTM |
| Bill | https://www.njleg.state.nj.us/2016/Bills/A5000/4988_I1.PDF |
Loading...